CONTROLLER CONTROLLER RGB LED Dimmer DMX DDL-88

Product description
The device is designed to control LED RGB Led (Led strip, Led modules, etc.). Polarization of output allows you to connect diodes in a common plus (common anode).
Operation of the device can be fully controlled by DMX-512 or IR remote control.
The device is designed to control LED RGB Led (Led strip, Led modules, etc.). Polarization of output allows you to connect diodes in a common plus (common anode).
Operation of the device can be fully controlled by DMX-512 or IR remote control.
With additional inputs to the controller can be connected to two buttons. One of them is responsible for switching and dimming, and the second allows you to change the color (programs). In the operating mode without DMX address micro-switches can be used to select the color or programs, determining the intensity and dynamics.
It is possible eg .: select the color using the micro-switches, then the change from the remote control and turn off or dim the lighting via an external button. All this makes the controller can be used in various configurations, which are not mutually exclusive.
The device has a function to remember the last settings in case of power failure, and several modes of the controller response after re-powering.
Master / Slave mode allows you to synchronize multiple controllers.
High resolution PWM (12-bit) and a number of applied algorithms allows for a very smooth change of colors unmatched by resolution 8-bit PWM. APPLICATIONS dimming has been adapted to the human eye, so that light perceived changed in a linear fashion. This solution allows to obtain more shades of color, especially when the LEDs more powerful.
Built-in circuit protection protects the driver and the installation of Led from damage. In the case of short-circuit switches off only the channel that a fault has occurred, and when it is removed automatically restores it to function.
The technology used SMD helped to minimize the dimensions of the controller. A number of solutions in the form of: removable connectors, an external IR receiver and mounting brackets driver makes it very easy to install.

TECHNICAL PARAMETERS

Power 8-15V DC
• 3 PWM outputs: Red, Green, Blue
• 12-bit resolution PWM (4096 levels of brightness)
• PWM frequency: 300 Hz
• load each output: 3A
• Total current consumption: 9A
• Output polarity: common plus (common anode)
• reverse polarity protection power supply
• surge protectors DMX inputs and switches
• circuit protection for outputs R, G, B
• indication of a short circuit
• indication of correct DMX transmission
• control via DMX, remote control, external buttons or micro switches
• mode MASTER / SLAVE (synchronization of multiple controllers)
• 7 DMX channels
• 24 built-in programs, and one program of its own
• system for smoothing transitions between colors for control of DMX
• leveling vibration image systems: PAL and NTSC
• dimming characteristic fitted to the human eye
• Easy integration with smart homes
• memory of last settings when power failure
• Possibility to use the controller as a single channel dimmer (control with a single button eg. The bell). Total load capacity: 9A
• accessories: remote control, external IR receiver
• mounting brackets
• removable connectors for easy installation
• Small dimensions: 68mm x 28mm x89mm
• Weight: 200g
• operation at temperatures from +1 to +45 C